MIL-DTL-17060G(SH)
(3) Number of dc dynamic braking stops.
(4) Number of plug reversals.
(5) Connected inertia at shaft speed
(6) Starting torque.
(7) Acceleration torque and time limits.
(8) Periods of running.
(9) Condition of loads during running, including no-load conditions.
(10) For submersible motors, the period of operation in air.
(12) The maximum periods and sequence of times the duty cycle (1) through (10) will be imposed in a 24-
hour period.
(13) Maximum operating speed, VSD motors only.
(14) Minimum operating speed, VSD motors only.
(15) Speed range, VSD motors only.
(16) Constant torque application, VSD motor only.
(17) Torque requirement at maximum operating speed, base speed and at minimum operating speed, VSD
motors only.
i.
Whether thermal protection is required and if the number of sensors is other than specified (see 3.5.1.7).
Enclosure (see 3.5.1.8).
j.
Submersible enclosures, depth of submergence for shaft seals (see 3.5.1.8).
k.
Speed (see 3.5.1.9).
l.
m. hp (see 3.5.1.10).
Type and design (see 3.5.1.11).
n.
Mounting (see 3.5.1.18).
o.
If rotation of end shields is required (see 3.5.1.19).
p.
If shaft extension differs from figures 1-4 (see 3.5.1.21).
q.
Bearing type, if other than ball (see 3.5.1.22.1).
r.
When sleeve bearings are required (see 3.5.1.22.5).
s.
Size of conduit openings for motors rated above 250 hp (see 3.5.1.24).
t.
Class of conventional insulation (see 3.5.1.30.1).
u.
If nonreversible motors are required (see 3.5.1.35).
v.
w. Whether identification plate marking is other than as specified (see 3.5.1.33.1).
Motors with cooling other than air (see 3.5.1.38).
x.
If bearing size and series is other than as specified (see 3.5.2.1.5.1).
y.
If temporary air filter is required and filtering media (see 3.5.2.1.11).
z.
bb. If sealed insulation system is required for Service C motors (see 3.5.2.2).
If pump motor is specified (see 3.5.2.3), specify the following:
cc.
(1) Service (see 3.5.2.3).
Nonmagnetic motors (see 3.5.2.4).
dd.
If motor for submarine service is specified (see 3.5.2.5) specify the following:
ee.
(1) If enclosure is other than specified (see 3.5.2.5.1).
52
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business