METRIC
MIL-PRF-62361E
15 September 2009
SUPERSEDING
MIL-PRF-62361D(AT)
21 June 1996
PERFORMANCE SPECIFICATION
MOTOR, DRIVE, DIRECT CURRENT: 2, 8, AND 6
REVOLUTIONS PER MINUTE
This specification is approved for use by the U.S. Army Tank-automotive and
Armaments Command, Department of the Army, and is available for use by all
Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers three direct current (dc) drive motors which are
intended to operate the optical focusing and controls on the night sight of military ground
vehicles.
1.2 Classification. Motors consist of the following types as specified (see 6.2).
Type I - 2 revolutions per minute (rpm)
Type II - 8 rpm
Type III - 6 rpm
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirement documents cited in sections 3 and 4 of this specification, whether
or not they are listed.
Comments, suggestions, or questions on this document should be addressed to U.S. Army
Tank-automotive and Armaments Command, ATTN: RDTA-EN/STND/TRANS, MS# 268,
6501 E. 11 Mile Road, Warren, MI 48397-5000 or emailed to
DAMI_STANDARDIZATION@conus.army.mil. Since contact information can change, you may
want to verify the currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 6105
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business