An Integrated Publishing, Inc. Site

An Integrated Publishing Website

Motors Electrical Mil-Specs - FSC 6105

CC-M-1807 - Motor, Alternating Current, Fractional & Integral Horsepower, Gsa (Use Ul 674)

This specification covers alternating current (ac) fractional and integral horsepower (hp) motors (for definitions see 6.5) of 500 hp or less for use in nontactical equipment.

CC-M-636 - Motor, Alternating-Current, (Fractional Horsepower )Use Cc-M-1807(

This specification covers fractional horsepower, single-phase and polyphase induction-type motors and single-phase series wound motors for use on nominal 110-or 220-volt, 50- or 60-cycle alternating-current systems in non-tactical equipment.

CC-M-641 - Motor, Alternating Current, (Integral Morsepower, 200 Hp And Smaller) (Use Cc-M-1807)

This specification covers integral horsepower, singlephase and polyphase induction motors and polyphase synchronous motors for use on alternating current systems in nontactical equipment.

CC-M-645 - Motor, Direct Current (Fractional Horsepower)

CC-M-646 - Motor, Direct Current (Integral Horsepower, 200 Hp And Smaller)

IEEE112 - Motors And Generators, Polyphase Induction, Ieee Standard Test Procedure For

This standard covers instructions for conducting and reporting the more generally applicable and acceptable tests to determine the performance and characteristics of polyphase induction motors and generators.

MIL-C-21696 - Coupling, Electromagnetic

MIL-DTL-17060 - Motors, Alternating Current, Integral-Horsepower, Shipboard Use

This specification covers the requirements for three-phase, alternating current (AC) motors for shipboard use in frame sizes not less than 182.

MIL-HDBK-117 - Motors, Electric, Small Acquisition, Operations And Support For Primer

The purpose of this handbook is to provide general information for use in reducing field failures of small electric motors.

MIL-M-12652 - Motor, D-C, 24 Volts, 1-1/2 H.P.

MIL-M-12692 - Motor, Constant Speed

MIL-M-12693 - Motor, Follow-Up (Altitude)

MIL-M-13574 - Motor, Induction, A-C, 208 Volt, 1-1/2 H.P., 3 Phase, 60 Cycle

This specification covers a motor for use as a component of the Gear, Oil, M3A1 with Carriage, Gun, 40mm, AA, M2A3.

MIL-M-13786 - Motors, Fractional Horsepower, Direct Current And Universal (For Communication And Other Electronic And Special Military Applications)

MIL-M-13787 - Motors, Alternating Current, Fractional Horsepower, Squirrel Cage (For Communication And Other Electronic And Special Military Applications)

MIL-M-13849 - Motor, Transmission Drive, For Fuze Setter Rammer, Combination M20

MIL-M-17059 - Motor, 60 Cycle, Alternating Current, Fractional H.P. (Shipboard Use)

This specification covers 60 cycle, fractional horsepower (hp.), alternating-current, motors for board use.

MIL-M-17413 - Motor, Direct Current, Integral H.P. Naval Shipboard (Navy)

This specification covers integral horsepower, corrosion resistant, direct-current, motor for shipboard use.

MIL-M-17556 - Motor, Direct-Current, Fractional Hp (Shipboard Use)

This specification covers fractional: horsepower, corrosion resistant, direct current, motors for shipboard use.

MIL-M-18392 - Motor, Drive, Torpedo (24 V.D.C., 2.5 H.P., 3900 Rpm)

MIL-M-19405 - Motor, Alternating Current, For As-473/Asb-1 (Bu0Rd Drawing 760144 Drive Motor Unit)

MIL-M-19766 - Motor, Propulsion (For Torpedo Mark 34 Mod 1)

MIL-M-19767 - Motor, Propulsion (For Torpedo Mark 27 Mod 4)

MIL-M-70806 - Motor Assembly

This specification supports the acquisition of the turret drive direct current electric motor assembly used in the M60A1 series tank. The motor assembly is a varying speed, 27.5 volt direct current (vdc), 20 horsepower (hp), series or compound wound, intermittent duty unit.

MIL-M-8609 - Motor, Dc, 28 Volt System, Aircraft, General Specification For

This specification covers the general requirements for two classes of aircraft electric motors and, together with a detail specification or standard containing equivalent information as described in 3.4.2, forms the complete specification for procurement of aircraft electric motors operable from 28v dc systems.

MIL-PRF-62361 - Motor, Drive, Direct Current: 2, 8, And 6 Revolutions Per Minute

This specification covers three direct current (dc) drive motors which are intended to operate the optical focusing and controls on the night sight of military ground vehicles.

MIL-PRF-62368 - Motor, Gearhead, 18-30 Volts, Direct Current

This specification covers a direct current gearhead motor used to operate the Remote Arming Device (RAD) on a military ground vehicle.

MIL-S-22432 - Servomotors, General Specification For

This specification covers the general requirements for servomotors.

MIL-S-22432/11 - Servomotor, Type 18Sm4A

MIL-S-22432/17 - Servomotor, Type 11Sm4A

MIL-S-22432/30 - Servomotor, Type 26V-08Sm4D

MIL-S-22432/31 - Servomotor, Type 11Sm4C

MIL-S-22432/32 - Servomotor, Type 15Sm4D

MIL-S-22432/34 - Servomotor, Type 18Sm4 (7631932)

MIL-S-22432/35 - Servomotor, Type 18Sm6 (Gearheaded)

MIL-S-22432/6 - Servomotor, Type Mark 7 Mod 7

MIL-S-22432/7 - Servomotor, Type 15Sm4C

MIL-S-22432/9 - Servomotor, Type 18Sm4C

MIL-S-22820 - Servomotor-Tachometer Generator, Ac; General Specification For

This specification covers the general requirements for servomotor-tachometer generators integrally built in the same housing utilizing the same shaft.

MIL-S-22820/1 - Servomotor, Tachometer Generator, Type 15Sm-Rg4A

MIL-S-22820/30 - Servomotor-Tachometer Generator, Type 26V-08Sm-Dg4A

MIL-S-22820/300 - Servomotor Tachometer Generator, Type 11Smrg4

MIL-S-22820/301 - Servomotor Tachometer Generator (Gearheaded), Type 26V-08Smdg4

MIL-S-22820/31 - Servomotor-Tachometer Generator, Type 26V-08Sm-1N4A

MIL-S-22820/32 - Servomotor-Tachometer Generator, Type 11Sm-Dg4A

MIL-S-22820/33 - Servomotor-Tachometer Generator, Type 11Sm-1N4A

MIL-S-22820/34 - Servomotor-Tachometer Generator, Type 15Sm-Ih4A (Heat Compensated)

MIL-S-22820/7 - Servomotor-Tachometer Generator, Type 18Sm-Rg4D

MIL-STD-1412 - Motor, Electric, For Air Conditioner Applications Methods Of Test And Instructions

This standard covers a series of specific test methods for testing and determining the characteristics of electric motors.

MIL-STD-2037 - Procedure To Obtain Certification For Electric Motor Sealed Insulation Systems

This standard applies to random wound, form wound, and salient pole motors.